Reman Howo 371 6×4 Tipper Truck

Industrial Reman Tipper Truck Description

• This REMAN ROAD reman Sinotruk Howo 6×4 tipper truck adopts complete industrial remanufacturing technology different from ordinary second-hand car renovation.
• The whole vehicle is completely disassembled, cleaned, inspected and reassembled strictly according to original factory technical parameters.

• The core power system, chassis structure and hydraulic unloading system are fully restored and upgraded. It solves the problems of power attenuation, oil leakage and unstable braking common in old used trucks.
• With mature vehicle structure and strong site adaptability, reman Sinotruk Howo 6×4 tipper truck is the most recognized and stable medium-tonnage dump truck model in the global remanufactured commercial vehicle market.

Specification Table

• Model: Reman Sinotruk Howo 6×4 Tipper Truck 371
• Cab & Electric: Single sleeper cab with A/C; full repaint & interior refresh. 24V wiring harness fully renewed, all sensors tested
• Engine: Fully overhauled, carbon cleaned, wearable parts replaced, power and fuel consumption recalibrated
• Transmission: HW19710 10-speed gearbox. Renewed bearings & synchronizers, smooth shifting bench test
• Chassis & Axles: 6×4 drive. Front 7.5T steer axle + rear 16T double reduction axles. Crack detected, seals renewed, gap calibrated
• Braking System: WABCO dual-circuit air brake. Full renewal of aging valves and air chambers, 100% air tightness tested
• Cargo Box: 5800×2300×1500mm, wear-resistant steel. Crack repaired, high-stress zones reinforced, anti-corrosion treated
• Hydraulic System: HYVA front lifting system. Pump & core seals replaced, full-load cyclic lifting tested
• Suspension & Tires: Fatigued leaf springs and shock absorbers replaced. 12.00R20 new tires (10+1 spare)

• The service life of engineering vehicles is determined by the fatigue degree of metal parts, not the appearance.
• After long-term heavy-load operation, the internal metal structure of the vehicle will produce invisible fatigue cracks, which cannot be eliminated by simple maintenance.
• Our remanufacturing process judges all parts through professional fatigue detection equipment, replaces all components that have reached the fatigue limit, and recalibrates the assembly coordination gap.
• This operation completely resets the whole vehicle life cycle, making the industrial reman tipper trucks regain the stable service life of a new car.

Difference Between “Visual New” Refurbishment and “Data New” Reman

• Refurbished trucks only achieve visual renewal through painting and cleaning, which belongs to appearance engineering. The internal engine, gearbox and axle wear are completely retained.
• Industrial remanufacturing is based on data standards. All parts are measured by professional tools, and the assembly performance is verified by bench test data.
• Industrial reman tipper trucks are “new in data and new in performance”, while refurbished trucks are only “new in appearance”.
• This is the core reason why industrial reman tipper trucks have stable performance and low failure rate.

RFQ

• Q1: How do you judge which old parts can be reused and which must be replaced?
  A: We rely on professional dimensional tolerance detection, metal fatigue detection and hardness testing data, not manual experience. Parts that meet the factory standard tolerance are reused, and parts exceeding the fatigue limit are forcibly scrapped and replaced.
• Q2: Is there any odometer adjustment in your industrial reman tipper trucks?
  A: Absolutely not. We truthfully record the original mileage of the base vehicle in the file. The dashboard displays the new working mileage after remanufacturing, and the real historical data is permanently archived.
• Q3: What kind of base cars will be eliminated and not remanufactured?
  A: Vehicles with serious collision deformation, twisted frame, water soaking, fire burning and major structural damage will be directly eliminated, and we will never remanufacture defective base vehicles.
• Q4: Doindustrial reman tipper trucks meet export inspection standards?
  A: Yes. All vehicles pass standardized pre-shipment inspection, with complete export documents and test reports, meeting the customs clearance and inspection standards of most countries.
• Q5: How to solve the problem of easy deformation of old cargo boxes?
  A: We cut off the deformed and fatigued parts, reweld and reinforce the high-stress welding points, thicken the worn bottom plate, and optimize the overall structural rigidity of the cargo box.
• Q6: What after-sales support do you provide for overseas users?
  A: We provide remote technical guidance, electronic maintenance manuals, fault diagnosis videos and optional supporting spare parts packages to ensure stable overseas operation of vehicles.