Reman Howo 380 8×4 Dump Truck

Reman Heavy Dump Truck for Sale Description

• Mining sites vary widely across regions: some transport dense heavy ore, others handle loose sand and gravel, while some operate on steep mountain tracks.
• REMAN ROAD reman 8×4 dump truck for sale remanufacturing workflow supports custom configuration for fleet buyers.

• We can adjust cargo plate thickness, tune engine power output, upgrade brake components and adapt suspension stiffness to match your local payload rules and site terrain, creating a vehicle built for your exact working environment.

Specification Table

• Model: Reman SINOTRUK 380 HOWO 8×4 Dump Truck
• Cab & Electric: Single sleeper cab with A/C; full repaint & interior refresh. 24V wiring harness fully renewed, all sensors tested
• Engine: Fully overhauled, carbon cleaned, wearable parts replaced, power and fuel consumption recalibrated
• Transmission: HW19710 10-speed gearbox. Renewed bearings & synchronizers, smooth shifting bench test
• Chassis & Axles: 8×4 drive. Front 7.5T steer axle + rear 16T double reduction axles. Crack detected, seals renewed, gap calibrated
• Braking System: WABCO dual-circuit air brake. Full renewal of aging valves and air chambers, 100% air tightness tested
• Cargo Box: Wear-resistant steel. Crack repaired, high-stress zones reinforced, anti-corrosion treated
• Hydraulic System: HYVA front lifting system. Pump & core seals replaced, full-load cyclic lifting tested
• Suspension & Tires: Fatigued leaf springs and shock absorbers replaced. 12.00R20 new tires

Graded Component Reuse on Truck Chassis

• Not all old components are scrapped in remanufacturing. For thick frame steel, heavy axle housings and structural brackets with no fatigue damage and qualified dimensional tolerance, we clean, repair and reuse them.
• Dynamic moving parts, sealing elements and friction components that bear repeated heavy impact are fully replaced with new high-quality parts.
• This graded reuse strategy preserves the robust original heavy-duty base structure of the HOWO 8×4, while eliminating all failure-prone consumable parts, balancing performance and procurement cost.

Inspection Transparency for Cross-Border Procurement

• Cross-border buyers face high risks purchasing used dump trucks. It is hard to verify whether the vehicle suffered major frame impact or overloading damage.
• REMAN ROAD remanufacturing process records every inspection step. We provide test videos, dimensional inspection data and component replacement lists before shipment.
• Buyers can arrange third-party inspectors to come onsite and verify the vehicle’s multi-axle performance, chassis integrity and hydraulic function, removing information asymmetry for international procurement.

Circular Economy Value of Truck Remanufacturing

• Manufacturing a brand-new dump truck consumes enormous steel and energy resources and releases large carbon emissions.
• Remanufacturing retains the high-value cast and forged heavy structural parts of the original HOWO chassis.
• Only worn consumable components are replaced. This drastically cuts raw material consumption and carbon footprint.
• For global engineering contractors with ESG and tender sustainability requirements, REMAN ROAD reman heavy dump truck for sale are a practical green equipment solution.

RFQ

• Q1: What is the difference between remanufacturing repair and normal vehicle maintenance?
  A: Routine maintenance only fixes existing faults. Remanufacturing is reverse manufacturing: we fully disassemble, inspect all components, replace parts approaching fatigue failure, and restore vehicle performance to factory standard before faults occur.
• Q2: Will the vehicle have abnormal vibration after remanufacturing?
  A: No. We balance axle load and check assembly gaps of the whole vehicle. We eliminate abnormal vibration caused by misaligned axles and loose worn components common on old dump trucks.
• Q3: How do you handle corrosion on the chassis during reman?
  A: We sandblast the whole chassis to remove old rust, apply anti-rust primer and protective topcoat. Hidden frame cavities are also treated for corrosion protection, adapting to humid and dusty mine environments.
• Q4: What base vehicle defects will lead to rejection before remanufacturing starts?
  A: Base trucks with fire damage, water soaking, serious frame distortion, cracked axle housing or history of major rollover accident will be eliminated and will not enter remanufacturing.
• Q5: Can reman heavy dump truck for sale meet export customs inspection requirements?
  A: Yes. Each REMAN ROAD reman heavy dump truck for sale has complete pre-shipment inspection records and test reports, complying with export inspection and customs clearance requirements of most countries.
• Q6: What is the residual value trend of reman heavy dump truck for sale?
  A: Since reman heavy dump truck for sale have complete rebuild records and verified quality, residual value holds far better than ordinary refurbished trucks. When reselling at the end of your project, the resale discount will be much smaller.