Reman Sinotruk Tipper Truck Howo 8×4

Reman 8×4 Truck for Sale Description

• For 8×4 dump trucks working in mines, the cargo box bears constant heavy impact from jagged rock and dense ore.
• REMAN ROAD reman Sinotruk tipper truck reman process inspects every weld seam of the cargo bed, cuts out worn or deformed plate sections, rewelds stress points and adds reinforcing ribs.

• The upgraded cargo box can withstand repeated heavy material loading, reducing plate deformation and cracking, extending the service life of the cargo body in harsh mining environments.

Specification Table

• Model: Reman Sinotruk Tipper Truck Howo 8×4
• Cab & Electric: Single sleeper cab with A/C; full repaint & interior refresh. 24V wiring harness fully renewed, all sensors tested
• Engine: Fully overhauled, carbon cleaned, wearable parts replaced, power and fuel consumption recalibrated
• Transmission: HW19710 10-speed gearbox. Renewed bearings & synchronizers, smooth shifting bench test
• Chassis & Axles: 8×4 drive. Front 7.5T steer axle + rear 16T double reduction axles. Crack detected, seals renewed, gap calibrated
• Braking System: WABCO dual-circuit air brake. Full renewal of aging valves and air chambers, 100% air tightness tested
• Cargo Box: Wear-resistant steel. Crack repaired, high-stress zones reinforced, anti-corrosion treated
• Hydraulic System: HYVA front lifting system. Pump & core seals replaced, full-load cyclic lifting tested
• Suspension & Tires: Fatigued leaf springs and shock absorbers replaced. 12.00R20 new tires

The Misconception: “Thicker cargo plate equals better durability”

• Many buyers assume that simply adding thicker steel plate to the cargo box is the best solution for ore hauling.
• This is a common misunderstanding. Over-thick plate adds extra dead weight, reduces usable payload and puts more stress on the chassis.
• REMAN ROAD reman 8×4 truck for sale cargo box optimization uses targeted reinforcement: we thicken only high-impact bottom and corner areas, retain optimized plate thickness elsewhere, and add reinforcing ribs.
• This balances impact resistance and total vehicle weight, protecting the chassis while preserving maximum payload capacity.

How Reman Reduces Tire Operating Cost for Fleets?

• 8×4 dump trucks have 12 tires, so uneven axle alignment creates huge tire waste. Used 8×4 trucks often suffer rapid, irregular tire wear because of misaligned axles.
• In REMAN ROAD reman 8×4 truck for sale reman workflow, we inspect and adjust every axle’s parallelism and load balance. After recalibration, all tires share load evenly.
• This greatly extends tire service life and cuts your fleet’s annual tire replacement expense, delivering recurring savings over the vehicle’s working life.

RFQ

• Q1: Will reman 8×4 truck for sale have lower payload limit than new dump trucks?
  A: No. After remanufacturing and chassis reinforcement, the vehicle’s rated payload capacity fully restores to original factory specification, matching the load capacity of brand-new tippers.
• Q2: How long will the reinforced cargo box last in ore mining sites?
  A: With our targeted reinforcement and anti-corrosion treatment, the cargo box can work stably for years under regular heavy ore loading, far longer than ordinary refurbished cargo boxes.
• Q3: What warranty coverage is available for reman 8×4 truck for sale core assemblies?
  A: We offer warranty on remanufactured engine, gearbox and drive axles. Any quality failure of these core assemblies within the warranty term will be covered under our service agreement.
• Q4: How do you test multi-axle braking performance on heavy loaded 8×4 trucks?
  A: We carry out loaded downhill braking simulation tests. We verify brake response, air tightness and heat dissipation performance to guarantee safe braking under full payload on steep mine roads.
• Q5: Are the replaced parts OEM quality?
  A: Critical power, braking and hydraulic components use OEM equivalent high-grade parts. All parts have quality certification; inferior aftermarket parts are strictly prohibited in our reman workflow.
• Q6: What is the delivery timeline for bulk fleet orders?
  A: Our standardized reman production line maintains stock of finished reman 8×4 truck for sale. For bulk fleet orders, we can schedule staggered shipment to match your mine project construction schedule.