Reman Howo 380 8×4 Tipper Truck

Reman 8×4 Tipper for Sale Description

• 8×4 trucks carry far heavier loads than 6×4 models, placing higher demand on braking performance when descending sloped mine roads.
• REMAN ROAD reman 8×4 tipper for sale reman process renews brake valves, air chambers and brake linings of the dual-circuit braking system.

• We perform loaded braking tests and air tightness checks to guarantee stable, responsive braking performance.
• Reman Howo truk reduces skidding and brake failure risks for heavy downhill hauling on rugged mine terrain.

Specification Table

• Model: Reman Sinotruk Howo 380 8×4 Tipper Truck
• Cab & Electric: Single sleeper cab with A/C; full repaint & interior refresh. 24V wiring harness fully renewed, all sensors tested
• Engine: Fully overhauled, carbon cleaned, wearable parts replaced, power and fuel consumption recalibrated
• Transmission: HW19710 10-speed gearbox. Renewed bearings & synchronizers, smooth shifting bench test
• Chassis & Axles: 8×4 drive. Front 7.5T steer axle + rear 16T double reduction axles. Crack detected, seals renewed, gap calibrated
• Braking System: WABCO dual-circuit air brake. Full renewal of aging valves and air chambers, 100% air tightness tested
• Cargo Box: Wear-resistant steel. Crack repaired, high-stress zones reinforced, anti-corrosion treated
• Hydraulic System: HYVA front lifting system. Pump & core seals replaced, full-load cyclic lifting tested
• Suspension & Tires: Fatigued leaf springs and shock absorbers replaced. 12.00R20 new tires

Reman vs Refurbishment: Difference in Multi-Axle Calibration

• Refurbishment only cleans and paints the 8×4 truck; it never touches axle geometry.
• Axle misalignment, the root cause of many breakdowns, remains completely untouched.
• Industrial remanufacturing fully disassembles all four axles, measures backlash, replaces worn bearings and re-calibrates axle spacing and parallelism.
• Refurbished 8×4 trucks look new on the surface, but their underlying multi-axle coordination defects remain, creating safety risks and high running costs.

Capital Allocation Logic: Reman 8×4 Tipper for Medium-Term Mining Projects

• Large mining projects often last 3–5 years, which is a perfect fit for REMAN ROAD reman 8×4 tipper for sale.
• Buying brand-new 8×4 trucks locks up massive capital, and residual value drops sharply after the project ends.
• Cheap second-hand 8×4 trucks carry unpredictable breakdown risks that can halt mining production.
• REMAN ROAD reman truk Howo deliver near-new heavy-load performance at a much lower purchase price.
• At the end of your project, the reman 8×4 tipper for sale retains stable residual value, optimizing your capital turnover.

RFQ

• Q1: Why do reman 8×4 tipper cost much less than brand-new dump trucks?
  A: The large cost saving comes from reusing intact heavy forged structural parts such as frame and axle housings. We only replace worn consumable parts, avoiding the huge raw material and casting cost of manufacturing a brand-new heavy chassis.
• Q2: Is the remanufacturing process of reman 8×4 tipper for sale more complex than 6×4?
  A: Yes. The four-axle structure adds extra inspection and calibration steps for dual front steer axles and dual rear drive axles, requiring extra multi-axle geometry testing and load balancing work.
• Q3: What maintenance schedule do you recommend for reman 8×4 tipper for sale?
  A: We provide a custom maintenance manual for reman 8×4 tipper for sale, with predictable service intervals for engine oil, brake components and hydraulic seals. The maintenance cycle is more stable than unknown used trucks.
• Q4: What will happen if the axle load balance is not calibrated during remanufacturing?
  A: Unbalanced axle load creates uneven tire wear, extra stress on frame welds, higher fuel consumption and increased risk of axle housing damage under heavy payload.
• Q5: Can I arrange third-party inspection before shipment?
  A: Absolutely. We welcome authorized third-party inspectors to test chassis, braking, hydraulic lifting and multi-axle alignment before loading for export.
• Q6: Can you provide spare parts package for heavy reman tipper trucks for sale for overseas mine site?
  A: Yes, we can supply matched wear parts packages including filters, brake linings, hydraulic seals and tire accessories, to support on-site maintenance for overseas mining fleets.